How to select the suitable slewing bearing correctly

Many people do not know how to choose the suitable slewing bearings correctly, when they want to buy or customize the slewing bearing but do not know which model to use, the following is a simple introduction for everyone basic steps for slewing bearing selection(https://www.slew-bearing.com/slection-of-bearing.html):

1. According to the maximum load (axial load, radial load, overturning moment) that the slewing bearing is subjected to when it is in a static state according to the use environment. Take this maximum load as a static rating.

2. According to the static safety factor based on the type of machine installed.

3. Refer to the Xuzhou Wanda slewing bearing product catalogue(https://www.slew-bearing.com/download.html) to initially select the slewing bearing model and determine which formula to use to calculate the static reference loads Fa' and M'.

4. Calculate the static reference loads Fa' and M'.

5. Find the static load curve corresponding to the slewing bearing of the selected model in the Xuzhou Wanda Slewing Bearing Product Catalogue, and mark it in the graph (Fa', M')

6. Check if the coordinate point whether within the Static load permission.

7. Check the bolt bearing capacity.

8. Complete preliminary selection.

After reading the introduction, do you have any understanding of the selection of the slewing ring? If you don't understand the above description, you can directly contact us(https://www.slew-bearing.com/contactus.html) online or by email. We will recommend the appropriate model according to your demand. Also we could give you the most reasonable solution according to your drawings.