Light type slewing bearings widely application in engineering machinery,construction machinery, metallurgy mining machinery, shipping port machinery, environmental machinery, light industrial machinery, petrochemical machinery,
engineering vehicles, military devices, food machinery, canning nachinery, car parking systems etc.
Application
• Small Cranes | • Cranes and Manipulators | • Pitch Bearing for Windpower |
• Industrial Positioners | • Aerial Lifts | • Yaw Bearing for Windpower |
• Rotation Tables | • High-capacity Lifting Equipment | • Segement Erector for TBM |
• Rotating Displays | • Truck Mounted Boom Cranes | • Construction Machinery |
• Bottling Machines | • Position/Index Tables | • Material Handling Machine |
• Conveyors | • Radar & Satellite Antennas | • Wasterwater Treatment |
• Mobile Crane Truck | • Robots | • Grapples |
• Solar Trackers | • Medical Equipments | • Scrap Hanling Machines |
• Solar Power System | • Excavators | • Mining Machines |
• Combination Sewer Cleaners | • Digger Derricks | • Bucket Trucks |
• Forestry Equipment | • Log Loaders & Fellers | • Man Lifts |
• Crawer Crane | • Knuckleboom Loaders | • Railroad Machines |
Slewing Bearings can accommodate axial, radial and moment loads acting single or in combination and in any direction. They are not mounted in a housing or on a shaft, but directly to a seating surface. The inner and outer ring are supplied with mounting holes. Both rings may have integral gears. They are also referred to as slewing rings and tabletop bearings. Slewing ring bearing can perform oscillating (slewing) as well as rotating movements. They may be used without gears or with internal or external gears.
Model | Dimensions(mm) | Mounting dimension(mm) | |||||||
D | de | H | D1 | D2 | n | Φ | M | t | |
WD-062.20.0414 | 486 | 326.5 | 56 | 460 | 375 | 24 | 13.5 | 12 | 20 |
WD-062.20.0544 | 616 | 445.2 | 56 | 590 | 505 | 32 | 13.5 | 12 | 20 |
WD-062.20.0644 | 716 | 547.2 | 56 | 690 | 605 | 36 | 13.5 | 12 | 20 |
WD-062.20.0744 | 816 | 649.2 | 56 | 790 | 705 | 40 | 13.5 | 12 | 20 |
WD-062.20.0844 | 916 | 737.6 | 56 | 890 | 805 | 40 | 13.5 | 12 | 20 |
WD-062.20.0944 | 1016 | 841.6 | 56 | 990 | 905 | 44 | 13.5 | 12 | 20 |
WD-062.20.1094 | 1166 | 985.6 | 56 | 1140 | 1055 | 48 | 13.5 | 12 | 20 |
Note:
1. N1 is the numbers of lubricating holes. Oil cup M8×1JB/T7940.1~JB/T7940.
2. The Oil nipple's location can be change according to the user's application.
3. "Km" is addendum reduction; m: module; z: teeth nos.
4. For the load curve capacity, please download our catalogue for slewing bearing.
If you have any question,pls feel free to contact us.