Single Row Four Point Contact Ball Slewing Bearing with External Gear for Revolving Amusement Equipment

Single Row Four Point Contact Ball Slewing Bearing with External Gear for Revolving Amusement Equipment

The single row four point contact ball slewing rings is composed of two seat rings, which design in compact structure and light weight, steel ball contact with the circular raceway at four points; it can bear the axial force, radial force and the tilting moment at the same time.

The contact angle is usually 35°. If there is only a radial load, each steel ball contacts the raceway at four points. If there is only a unidirectional axial load, each steel ball contacts the raceway at two points. It can bear axial loads in two directions as well as a certain eccentric load, i.e. torque. Such kind of bearing has features and properties of both single-row and double-row angular contact ball bearings. If it is used in a high-speed scenario, two-point contact must be ensured for its normal working.

The Thin Section Slewing Bearing has the same structure with ordinary  slewing bearing,but the weight is light,and rotate flexibly

Tytle:Single Row Ball Bearing External Gear

Wight/KG:24-2800

Strengths:The Oil nipple's location can be change according to the user's application.

Application:

1. food machinaery,

2.canning machinery  

3.environmental machinery etc.

To get drawing (pdf),please clik on Model.

Note:

1. n1 is the nos of lubricating holes.Oil cup M10×1JB/T7940.1~JB/T7940.2.The Oil nipple's location can be change according to the user's application.

2. n-φcan change to tapped hole,the diameter of tapped hole is M,depth is 2M.

3. The tangential tooth force in the form is the max tooth force,the nominal tangential tooth force is 1/2 of the max one.

4. "K" is addendum reduction coefficient.