1.Structural features of external gear slewing bearingexternal gear slewing bearing can bear larger rotary torque ,meanwhile, with special sealing structure has good sealing performance. External tooth with double row ball slewing bearing,,has two rows equal-diameter rolling bodies, can bear large a

Inner Ring and Outer Ring The bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth. Each ring is made from a medium carbon steel forging.slewing bearings(http://www.slew-bearing.com/SLEWING-BEARING-pl502823.htm

Service Factors To determine if a Slewing Ring bearing is appropriate for an application, a SERVICE FACTOR is applied. Refer to the table below for a guide to the service factor to apply to your application. The load rating curves shown in this catalog are approximate, and represent an application s

Slewing bearings are generally selected on the basis of the static load, which is calculated using the forces for axial and radial loads coming on it as well as the tilting moment. For correct selection of the slewing bearing, certain parameters such as speed, load, and operating temperature are req